Come posso configurare LastPass Universal Proxy 4. x con il server.properties file di configurazione senza usare lo strumento CLI su Windows?

La versione ufficiale di questo contenuto è in inglese. Alcuni dei contenuti della documentazione di GoTo sono stati tradotti per facilitarne l’accesso. GoTo non ha il controllo sui contenuti tradotti in modo automatico, che potrebbero contenere errori, imprecisioni o essere in una lingua errata. Non viene fornita alcuna garanzia, esplicita o implicita, in merito alla precisione, all’affidabilità, all’adeguatezza o alla correttezza di qualsiasi traduzione dall’originale inglese a qualsiasi altra lingua, e GoTo declina ogni responsabilità per eventuali danni o problemi derivanti dall’uso di questi contenuti tradotti automaticamente da parte dell’utente o per l’affidabilità di tali contenuti.

Come posso configurare LastPass Universal Proxy 4. x con il server.properties file di configurazione senza usare lo strumento CLI su Windows?

Prima di iniziare: Controlla Come posso impostare LastPass Universal Proxy v4.x ? per informazioni su come scaricare e installare LastPass Universal Proxy.

Informazioni su questa procedura:

Nota: questa funzionalità richiede un account con LastPass Business + componente aggiuntivo Advanced MFA. Come posso aggiornare il mio account LastPass Business con un componente aggiuntivo?

Importante: Per usare LastPass Universal Proxy 4. x, un Active Directory Connector deve essere installato e deve essere presente un'Active Directory.

Nota:

Ti consigliamo di usare il Strumento CLI quando si configura Universal Proxy per la prima volta, in quanto genera una versione iniziale della server.properties file. Questo file è modificabile con un editor di testo, per cui puoi modificare server.properties per modificare la configurazione.

Inoltre, se hai fatto un errore durante la modifica del file di configurazione, puoi sempre partire da zero dallo strumento CLI e creare un nuovo file.

Suggerimento:

Per controllare il contenuto corrente del file server.properties senza dati sensibili, apri PowerShell ed esegui il seguente comando:
```
uproxy -showConfig
```
Per aprire il file server.properties nell’editor di testo predefinito, apri PowerShell ed esegui il seguente comando:
```
uproxy -editConfig
```

Universal Proxy 4.2 non supporta la -showconfig e -modificconfigurazione comandi.

Per ulteriori informazioni sulle impostazioni di configurazione, vedi Come posso configurare LastPass Universal Proxy 4. x usando l'interfaccia della riga di comando (CLI) su Windows?.

Passa alla cartella C:\Program Files\LastPass\Universal Proxy\conf e salva server_template.properties con il nome server.properties.
Apri il file server.properties con un editor di testo e modifica le proprietà.

Salva il file server.properties.

Il file server-template.properties in C:\Program Files\LastPass\Universal Proxy\conf contiene tutti gli attributi possibili e le rispettive descrizioni.

###
### This configuration file contains the settings for the Universal Proxy.
### It has four sections
### 	* Server settings
### 	* LastPass API settings
### 	* LDAP settings
### 	* RADIUS settings
### Fill Server settings and LastPass API settings first. Then fill LDAP settings if you plan to use
### Universal Proxy using LDAP or LDAPS or fill RADIUS settings if you are going to use RADIUS.
### If a value is not applicable for your case leave it as it is.
### For further information see the online documentation:
### 	https://support.lastpass.com/help/what-is-lastpass-universal-proxy
###
### Note, that it is also possible to configure Universal Proxy using the command line tool.
### Issue the following command in PowerShell to start the command line configuration tool:
### 	uproxy -configurationTool
### Online documentation for the configuration tool:
### 	https://support.lastpass.com/help/how-do-i-configure-the-lastpass-universal-proxy-via-command-line
###


#######################################
#######################################
###                                 ###
### Universal Proxy Server settings ###
###                                 ###
#######################################
#######################################
##
## Server settings: set these values to configure how the Universal Proxy handles incoming authentication
## requests. Choose the authentication protocol (LDAP, LDAPS or RADIUS), specify the ports and domains and
## set the server mode (LP, PLP, SFA).
## For an explanation about server modes see the documentation:
## 	https://support.lastpass.com/help/what-is-lastpass-universal-proxy#server_modes
##

# The protocol to authenticate users. [LDAP | LDAPS | RADIUS]
server.protocol=

# The mode in which Universal Proxy should run [LP | PLP | SFA].
server.mode=

# The port on which Universal Proxy listens on.
server.port=

#Accounting port is used if Radius protocol is selected.
#The accounting port Universal Proxy listens on.
server.accounting.port=

# The name of your company. This value appears to end users in the MFA app.
company.name=

# The name of your company. This value appears to end users in the MFA app.
company.name=

#################################################################
#################################################################
###                                                           ###
### Authentication server settings: Common Login Service      ###
###                                                           ###
#################################################################
#################################################################
##
##

cli.cls.integration.key=
cli.cls.integration.secret=
default.cls.auth.method=

###################################################
###################################################
###                                             ###
### Authentication server settings: LDAP server ###
###                                             ###
###################################################
###################################################
##
## LDAP settings: set these values to configure Universal Proxy to be able to communicate with a LDAP server.
## Leave these values blank if you are not planning to use Universal Proxy for LDAP authentication.
## The ldap.admin.password field is applicable only if the server mode is LP.
## The ldap.address, ldap.port and ldap.tls fields can only be used if the server mode is either PLP or SFA.
## For an explanation about server modes see the documentation:
## 	https://support.lastpass.com/help/what-is-lastpass-universal-proxy#server_modes
## For the current server mode see the value of the server.mode variable in this file.
## Leave any value blank which is not applicable for your current setup.
##

# The address of the AD. Applies to server modes: [PLP | SFA]
ldap.address=

# The port on which the AD expects authentication messages (default: LDAP: 389, LDAPS: 636). Applies to server modes: [PLP | SFA]
ldap.port=

# The distinguished name of the LDAP admin user. Example: CN=admin,CN=Users,DC=domain,DC=com
ldap.admin=

# The password of the LDAP admin user. Applies to server modes: [LP] only.
ldap.admin.password=

# LDAP naming attribute: the name of the LDAP field in which the Windows user logon name is stored. Possible values: [cn | uid | userPrincipalName | sAMAccountName]
# ldap.attribute.login=sAMAccountName
ldap.attribute.login=

# Password of the Keystore and Truststore files containing the SSL certificates. Applies only if you chose LDAPS protocol in Universal Proxy Server settings.
keystore.password=

#####################################################
#####################################################
###                                               ###
### Authentication server settings: Radius server ###
###                                               ###
#####################################################
#####################################################
##
## RADIUS settings: set these values to configure Universal Proxy to be able to communicate with a real RADIUS server.
## Leave these values blank if you are not planning to use Universal Proxy for RADIUS authentication.
## Note, that radius.server.address and radius.server.port are values which have to be filled only if the
## server mode is either PLP or SFA.
## For an explanation about server modes see the documentation:
## 	https://support.lastpass.com/help/what-is-lastpass-universal-proxy#server_modes
## For the current server mode see the value of the server.mode variable in this file.
## Leave any value blank which is not applicable for your current setup.
##

# The address of the RADIUS server. Applies to server modes: [PLP | SFA]
radius.server.address=

# The port on which the RADIUS server expects the authentication messages (1812 by default). Applies to server modes: [PLP | SFA]
# radius.server.port=1812
radius.server.port=

# The accounting port of the Radius server.
# radius.server.accounting.port=1813
radius.server.accounting.port=

# The RADIUS secret.
radius.secret=

#RADIUS Ldap authentication
radius.ldap.auth.enabled=

Importante: La durata massima del sAMAccountName è di20 caratteri.